Home Services HVAC

Honeywell thermostats are recognized as some of the best heat control devices a home can have. They also happen to have a tendency for using auxiliary heat pretty heavily. The problem is that excess auxiliary heat use can be a drain on your heating bill and may even contribute to higher energy bills. So, how do you turn this feature off?

Don’t ignore your instincts if you suspect your gas furnace has a cracked heat exchanger. Not repairing a damaged heat exchanger in a timely manner can cause serious health issues for your family. Among the toxic gases released into the air is carbon monoxide. It’s important to check to see if it’s cracked and then stop all use. But, how do you tell if it’s broken?

It can leave you feeling uneasy when you hear unusual sounds coming from your furnace. Some furnace sounds are normal, but they can also point to serious problems. So, you may ask, why is my furnace rattling?

Whether you are experiencing issues with your gas furnace or are simply performing routine maintenance, keeping your furnace clean is imperative. When components get dirty or clogged, it can lead to components working improperly or not at all.

Honeywell makes some of the most dependable and popular options for thermostats on the market. Ranging from basic models to smart thermostats, Honeywell has a plethora of offerings that their customers have been using for years.

Your furnace has one job: blowing hot air. If your furnace is not doing that, what are you paying it for? To address this issue, we’ve come up with some common reasons your furnace may not be blowing hot air.

Heat pumps and mini splits are both considered central HVAC units because they are able to bring heat from inside to outside in order to control indoor temperatures. However, they are not the same. Paying attention to their differences is important in selecting the type you need for your home.

Many homeowners use a whole-house humidifier to improve the air quality in their houses. They can help eliminate impurities in the air such as viruses and bacteria that would make you sick. Understandably, some homeowners are confused about when to turn on the whole-house humidifier.

Proper planning is critical when installing appliances. If you rush the initial planning, you risk creating more problems in the future. Especially when it comes to propane furnaces, your initial blueprint is essential. There are many reasons to chooses a propane furnace. Some people don’t live close enough to town for natural gas. Others might be looking to replace an old propane furnace. Regardless, if you wonder which areas of the house are appropriate for installation, you’ve come to the right place.

You need a permit to install a mini-split or replace one. The installation process of a mini-split is complex and requires working with wires, piping materials, and chemicals. Replacing a mini-split can be a dangerous job, but a professional can handle it safely.

Every component of your HVAC system affects its performance and your comfort at home. That even applies to small parts such as furnace filters that many homeowners overlook. So, does furnace filter thickness matter?

Depending on where you live, a functioning air conditioner can either be a convenient feature or an absolute necessity. Whatever the case, it’s important to know what to look for when buying one for your home.

The air quality in your home is just as important as any other necessity. Your HVAC system can determine your comfort at home, but it can also be a matter of safety. Even still, you may be unfamiliar with how a dirty home air filter can affect your home.

If you recently noticed a strange pool of water near your HVAC unit, then you probably have been thinking about checking out the condensate pump. Condensate pumps are a vital part of most air conditioning units. This is doubly true if you live in a humid environment prone to lots of moisture. It’s normal to wonder if your pump’s actually working. So, how can you tell if it is?

A properly functioning AC unit is a must in sweltering hot summers. It’s easy to panic if you notice your air conditioner isn’t working correctly. One common problem is an AC unit with a fan that is not spinning and that is hot.

Having a second level in your home is a bonus for most people who want more room and privacy. But what about heating and cooling your upstairs? Heating seems to be no problem since heat rises. The problem is, during the summer, how do you increase airflow to the second floor?

The liquid line on your air conditioner is a big part of its proper operation. It is common for the line to become hot, and it is often due to it being dirty or underpowered. Follow along as we explore how you can cool down the liquid line on your AC.

Central air conditioning is a modern commodity and it’s hard to get comfortable when it isn’t working properly. HVAC system problems can be overwhelming and even expensive, especially if you don’t know what you’re doing. So, why is your central air conditioning line freezing up?

Air conditioners play a vital role in the home, especially during the hotter summer months. Depending on where in Canada you live, temperatures can get balmy and stretch throughout the summer. Without air conditioning, it can make for an awfully sweaty experience.

Your furnace blower motor is an essential part of your HVAC. It is the reason your furnace or AC is able to blow the air throughout your home. Many reasons can cause the blower motor to fail, such as old age or a high amperage draw. If you have an issue, how much would it cost to replace your HVAC blower motor?

Ever since the 1970s, central air conditioning has been a popular choice for cooling homes. But the installation of a central air conditioning system can be labor-intensive and costly. Is it possible to do it yourself, or do you need a professional with a permit to install air conditioning?

Swamp coolers are great options to consider if your household is struggling against the oppressive heat. They can be a terrific addition to your home under the right circumstances. But in the middle of summer, one of the worst things is when your swamp cooler motor keeps shutting off.

With all of the components within a furnace, it only makes sense that some of them will wear down and simply stop working eventually. Being able to recognize the signs of failure and implement a fix can save thousands in the long run and even keep your furnace working for far longer.

The heat exchanger in your furnace is a group of tubes and coils. These tubes and coils heat the air that then shoots out into your home or workplace. There are many reasons why your furnace heat exchanger can go bad, and if this happens you need to act quickly.

Dry air can be a real problem, especially inside your home during the coldest months of the year. Humidity already tends to be lower in the coldest weather, and as you raise heat in your home, you may actually continue to decrease the relative humidity. Before you start to get dry and itchy skin, or experience static cling every time you put on your clothes, you might want to address the humidity issue. But how do you fix the problem of dry air in a house?

When homeowners have a furnace that works well, they’re not going to complain. Furnaces that are well-maintained can easily last 20 years or more. However, after a certain point, even the most reliable furnace will need to be replaced or repaired. If you’re like many homeowners, you probably are wondering when it makes more sense to replace rather than repair.

Without central air, homeowners across the world would be out of luck during the spring and summer. Proper central air maintenance is necessary for it to run properly, and that includes maintaining the filters. So, why does your central air have two filters?

Thermostats that seem to change the settings randomly can be suffering from several different ailments. A properly operating programmable thermostat may change settings if the thermostat is not programmed correctly.

If you’re in the market for new HVAC appliances in your home, the sheer number of products can be overwhelming. There are a wide variety of reputable brands as well as products with varying efficiencies and styles. Rheem and Trane are two of the country’s leading HVAC manufacturers. 

As you’re used to your furnace doing its job without any issues, it can come as a shock to see water pooling around its base and realizing that something is wrong. It’s essential to take immediate action as, left uncorrected, even a small leak can result in extensive and costly damage.

HVAC systems have become indispensable. After all, an HVAC system will provide cool air indoors when it’s hot outside, and then make a room warm and toasty when the temperature outside drops.

Most motors are designed to run only one way, clockwise or counterclockwise. They are not made to run both ways unless it is a multidirectional motor. Any kind of motor that runs the opposite way than what is intended will not produce the effects they are supposed to. In other words, your AC will not blow cold air.

When you live in a cold-weather climate, your furnace becomes one of the most important tools at your disposal during those cold months. Your insulation can only keep so much of that cold out before your furnace needs to intervene and warm things up.

Air conditioners are incredibly complex machines, which is why most people will immediately throw their hands up in the air and give up when they suddenly stop working. However, it’s not a smart thing to do. In many cases, your AC unit probably has a fairly fixable cause. If it’s a blown fuse, you can fix it in minutes. But, how can you tell if it’s actually a blown fuse?

Nothing is more annoying in the HVAC world than when your furnace won’t kick on. It can also be intimidating at first because we all know that furnace problems sometimes lead to expensive repairs. So, what should you do when the pilot light is lit, but the furnace won’t kick on?

When it comes to your home, there are few things that are as important as having a good HVAC system. It’s what will keep your home warm and also regulate your home’s temperature. In recent years, heat recovery ventilation systems have become very popular. As one of the newest “hot features” of homes, it’s worth taking a look at what they can and cannot do for your home.

When you hear that a heater is “gas-powered”, it may come as a surprise when you find out that such a heater will not run without electricity. This article will explain why gas-powered heaters don’t run without electricity, and also some tips for what to do when the power goes out will be discussed.

Our furnaces are quite the piece of equipment. There are a number of components within that allow it to deliver heat into our homes, keeping us warm even when the temperatures are subzero. And just like any other type of equipment, things can go wrong.

When the temperatures start to drop in the winter months, your furnace may struggle to maintain a comfortable temperature in your home. While that may sometimes mean that you need a new furnace, it most often means that one of your furnace parts could benefit from a little maintenance. Understanding all of the various parts of a furnace can help you to make an informed decision about what is best for your home.

When you’re reading about gas meter issues, chances are that you’ve heard mention of a gas meter lock. However, you might not have actually seen a lock on your meter. If you’re like many people who are new to HVAC work, you’re probably wondering what the meter lock is, and how you should remove it. The scoop on this part of your meter reading might surprise you.

You rely on your air conditioner to keep your home cool and comfortable when it’s hot and steamy outside. But what happens when your house is humid with the AC on, leading to excess moisture in the air? Isn’t your AC supposed to take care of that?

Central air is one of the most essential components of a clean and comfortable home. While it’s still viewed as a commodity, installing a central air conditioning system in new homes is pretty standard. However, if you have an older home and want to install one, this can prove to be difficult on your own.

Your house seems a little chilly, so you go out to your garage to check on the furnace. You notice it has a blinking red light- what does this imply?

As a homeowner, you’re already used to dealing with repairs and maintenance projects throughout your home. That said, it should come as no surprise that issues can arise with your furnace, too. A furnace can be a life saver during the cold winter months, which is why it’s important to ensure it is working properly. That means you can count on it to blow hot air through your home when you need it and to shut off when you don’t. So, what should you do if the furnace won’t turn off at all?

If you’ve heard much talk about furnaces and their specific components, you’ve likely come across the term “blower.” The blower, or blower motor, is one of the most essential components of your furnace.

Your furnace is a complicated piece of equipment. There are a variety of components within that run in tandem with one another to ensure that your home can remain comfortable and warm even when temperatures are below zero.

Your old A/C system is on the fritz, so naturally, you’d call the repairman to come to fix it, right? Unfortunately, depending on how old your system is, the solution may not be that simple. If you have an air conditioning unit manufactured before 2010, you may be required to rebuild or replace it.

Heat pumps are amazingly efficient for heating your home under most normal conditions. However, when conditions aren’t right, your heat pump depends on its emergency heating capability to keep the temperature in your house comfortable and stable. If you own a heat pump, there are some facts about emergency heating you should know.

Your new HVAC system is installed and running smoothly. However, you notice when the AC runs, there is a trickle of water from a pipe into a floor drain in the HVAC closet. Your HVAC technician explained the drain collects the condensate from the coils when the AC runs. Shouldn’t the drain have a vent like the other drains in the house?

With so many components in your furnace, it only makes sense that one may stop working from time to time. More often than not, a dirty or clogged filter will be the cause of a furnace that isn’t working properly.

A blower motor that works in A/C mode and not heat mode is a perplexing problem. Diagnosing these kinds of problems can be a challenge for a homeowner. Before you call an expensive repair technician, there are some things you should check yourself.

When you install a furnace in your home, you expect it to run for long periods of time. This is especially true when you’re still working on making your home warm. This includes the furnace blower as well. Unfortunately, that doesn’t always happen.

When the seasons shift, you remember just how critical your home’s heating and cooling systems are. Whether you’re entering a cold winter or a sweltering summer, make sure your thermostat is in good working order. The thermostat tells the HVAC system when it’s at the right temperature– but there are many ways miscommunications can happen.

When it is working properly, your furnace is capable of making your home comfortable in even the coldest of temperatures. The process requires several components coming together at once to produce warm air that blows throughout your home.

Your air conditioner is a real savior in the hottest months. One AC unit can turn a completely unbearable sunrise into a pleasant morning in bed under the covers. There is so much to be thankful for when it comes to having the modern convenience of temperature and humidity control. But sometimes air conditioners are very loud. In fact, an AC unit can get so loud, it is hard to concentrate on anything else. But how do you quiet a noisy air conditioner?

If the flame sensor on your furnace is broken or faulty, you may be looking for a temporary solution. Those who live in especially cold areas of the country rely on their furnace to keep them warm during winter months. Since your flame sensor is a safety device, when it’s not working properly, your furnace will not operate.

In most parts of life, being an overachiever is a great thing. This is true with academics, but when it comes to keeping your home toasty, overachieving isn’t that hot. A furnace that keeps running after your goal temperature is reached can be downright uncomfortable for both your body and your wallet. Rather than open up a window, it might be time to address the issue before your bills shoot through the roof.

You may notice that the AC in your home is not cooling as well as you think it should. The filters are new, the evaporator coil is clean, and the blower fan is working as well as ever. Inspecting the condensing unit outside leads you to a question. Which way should the fan on the condensing unit spin?

During your regular monthly maintenance on your HVAC system, you notice something strange. Water seems to be dripping from your furnace exhaust pipe. You immediately wonder what is happening, why it is happening, and what you should do if you notice your furnace exhaust pipe dripping water.

When you face replacing the major components of your HVAC system, new technologies can offer some interesting options. Heat pumps have been around for years. With the introduction of the residential geothermal system, a lot of confusion has resulted. Many homeowners wonder about the differences between a geothermal and an air-to-air heat pump.